HARVI II TE 0.188" Dia x 0.625" LOC x 2.250" OAL .010R 5 Flute Radiused Plain Shank End Mill 7155921
Strength and stability at the cutting edge
Best for high-performance milling in steel, stainless steel, cast iron, high temperature alloys, and hardened materials where stability and productivity matter.
This HARVI II TE end mill helps machinists increase material removal rates while maintaining tool life and cutting stability. Designed for side milling, slotting, ramping, and plunging, it delivers consistent performance in demanding production environments.
- Versatile solid carbide endmill for steels, stainless steel, high temperature alloys, and cast iron.
- Proprietary core and flute designs with optimum flute spacing for perfect chip formation and highest tool rigidity.
- Unique End Face Design for agressive ramping and plunging operations.
- Unequally spaced flutes and differential helix allow for the broadest range of applications.
- Chip gashes in the flutes ensure optimum chip removal.
- Eccentric relief provides edge stability in a broad range of materials.
Country of origin: varies
| Specification | Details |
|---|---|
| [D1] Effective Cutting Diameter | 0.188 in / 4.763 mm |
| [D] Shank Diameter | 0.188 in / 4.763 mm |
| [AP1MAX] Max Cut Depth | 0.625 in / 15.875 mm |
| [L] Overall Length | 2.250 in / 57.150 mm |
| [Rε] Corner Radius | 0.010 in / 0.254 mm |
| Number of Flutes | 5 |
| [FHA] Helix Angle | 36.0° |
| Coating | AlCrN |
| Center Cutting Tool | No Center Cutting |
| Cutting Tool Material | Carbide |
| Grade | KCSM15A |
| Materials | Steel, Stainless Steel, Cast Iron, High Temperature Alloys, and Hardened Materials |
| Applications | Side milling, slotting, ramping, plunging, and roughing / finishing with one tool |
| End Mill Finish Type | Finisher |
Tooling Overview
Optimized for side milling, slotting, ramping, and plunging. Apply speed and feed recommendations based on material group, tool diameter, and engagement for consistent performance.
| Specification | Details |
|---|---|
| [D1] Effective Cutting Diameter | 0.188 in / 4.763 mm |
| [D] Shank Diameter | 0.188 in / 4.763 mm |
| [AP1MAX] Max Cut Depth | 0.625 in / 15.875 mm |
| [L] Overall Length | 2.250 in / 57.150 mm |
| [Rε] Corner Radius | 0.010 in / 0.254 mm |
| Number of Flutes | 5 |
| [FHA] Helix Angle | 36.0° |
| Coating | AlCrN |
| Center Cutting Tool | No Center Cutting |
| Cutting Tool Material | Carbide |
| Grade | KCSM15A |
| Materials | Steel, Stainless Steel, Cast Iron, High Temperature Alloys, and Hardened Materials |
| Applications | Side milling, slotting, ramping, plunging, and roughing / finishing with one tool |
| End Mill Finish Type | Finisher |
